Belkin Bitronics F1U128-KIT Benutzerhandbuch Seite 25

P73046_F1U128uKIT univ_man.qxd
Windows
EXAMPLE: Sharing One Printer and a Zip
storage device)
When dealing with a mass storage device (devices that add a drive letter to
your system like E:) such as a Zip
tray must be configured so that the Bitronics switch is defaulted to the Port
attached to the Zip
connected to the Zip
always be connected, and not receive error messages:
1. Make sure that the port that connects to the Zip
Mass Storage Device in Settings. See Step 7 above for more info.
The image below shows the Zip
that the device type is Mass Storage Device. Type anything you
want in Display Name. Click OK when finished.
4/28/00 2:12 PM
95 / 98 and NT
®
® drive, the Bitronics Software in the system
® drive. It is necessary for the switch to always remain
® drive so that any time you access that drive, you will
® drive is connected to Port A, and
21
Page 21
®
(continued)
drive (or any other mass
®
® drive is set to
En