Chauvet DJ SlimPAR HEX 3 IRC Schnellanleitung Seite 4

SlimPAR™ HEX 3 IRC QRG
AC Power
Power Linking
Fuse
Replacement
IRC-6 Infrared
Remote Control
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
For the maximum number of SlimPAR™ HEX 3 IRC products that you can
power link at each voltage, see the sticker on the product or the User Manual.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The SlimPAR™ HEX 3 IRC is fully compatible with the IRC-6 infrared
remote control from Chauvet DJ. For more information on the IRC-6 or to
download instructions, go to www.chauvetlighting.com.
4
EN