Use Of The Burners - Thetford 330 Serie Bedienungsanleitung

■
Ensure that the appliance is connected to the 12V DC battery (for ignition models only);
■
Ignite the burners and let them burn to expel odours and vapours first.
Only use LPG (Liquefied Petroleum Gas). The appliance operates on propane or butane.
Propane is preferred over butane, because butane provides poor performance at an
ambient temperature below 10°C and cannot be used at an ambient temperature below
5°C.

6. Use of the burners

For the exact location of the control knobs see Main components on page 5.
Turning on:
■
Push and turn the control knob;
■
Turn the control knob anti-clockwise to the full rate position;
- The automatic burner ignition sparks and lights.
- For non-ignition models hold a lit match or gas match to the burners.
■
Keep the control knob pressed for about 10-15 seconds and then release it;
■
Adjust the height of the flame.
Turning off:
■
Turn the control knob clockwise to the 0 position to turn off the burner.
If the burner accidentally extinguishes turn the control knob to the 0 position and wait at
least 1 minute before re-igniting the burner.
If the burner has not lit within 15 seconds turn the control knob back to the 0 position
and release it. Wait at least 1 minute and repeat the steps above to turn on the appliance.
6