Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
H
OW TO SWITCH OFF THE COOLING
1. Press and hold the « O
to switch off the cooling (compressor) of the freezer.
2. The operational status indicator of the freezer goes off. The
cooling (compressor) is switched off.
WARNING! The setting « O
You must unplug the appliance to disconnect it from the mains.
4.5 Setting of the temperature / Fast Freezing Mode
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
NOTICE! If you want to switch off the appliance for a longer period of time,
disconnect
it
« D
ECOMMISSIONING
4.5.1 Setting of the temperature
❖ The setting of the temperature of the freezer can be adjusted manually by pressing
the relevant button until the desired value is indicated on the temperature
indicator bar; s. chapter 4.3 C
.
INDICATORS
❖ When you set a temperature, you set an average temperature for the whole
freezer. Temperatures inside each area may vary from the set temperature,
depending on how much food you store and where you place them. Ambient
temperature may also affect the actual temperature inside the appliance. When
you set the temperature of the freezer, these aspects should be taken into account.
The set temperature (
higher the setting is, the longer the compressor operates to reach the set
cooling temperature.
You can check the temperature inside the freezer using a suitable thermometer
(not included in the scope of delivery).
When the ambient temperature is extremely high (please observe the climatic class
of your appliance in chapter « T
colder setting if needed (recommended setting: «
/ O
» -
N
FF
FF
from
the
mains
,
TEMPORARILY
ONTROL PANEL
/
MIN
NORMAL
ECHNICAL DATA
~ 61 ~
(
COMPRESSOR
(A) for 3 seconds
BUTTON
»
switches off the compressor only.
(unplug!).
».
:
OPERATING BUTTONS AND
/
) can be changed as needed. The
MAX
»!), you can set the freezer to a
MAX
)
OF THE FREEZER
S.
also
chapter
»). If the colder setting
Werbung
Inhaltsverzeichnis
