Pkm GT 300 2 Serie Bedienungsanleitung Seite 74

7. Turn the water drain screw (A) through 180° (clockwise, s. arrow) so that the
water drain opening (B) points downwards; s. fig. below.
8. Drain the defrost water via the water drain opening.
9. Keep the container for the collection of the defrost water under supervision so
that it does not overflow.
10. When the defrosting process is finished, turn the water drain screw (A) through
180° (anticlockwise, s. arrow) so that the water drain opening (B) points upwards
again; s. fig. below.
11. Push the water drain screw (A) back into the appliance carefully and properly; s.
fig. below, arrow).
12. Reinstall the water drain plug inside the freezer!
13. Wipe and dry the appliance (in- and outside) and door seals using dry and soft
cloths. Dry thoroughly!
14. After cleaning leave the door open for a while to aerate the appliance.
15. Connect the appliance to the mains again.
16. Switch on the appliance again using the « On / Off » -
17. If needed, set a new temperature; s. chapter 4.5 S
/ F F
AST REEZING
M et seq.
ODE
~ 74 ~
; s. chapter 4.4.
BUTTON
ETTING OF THE TEMPERATURE