Installation Tips - Intellinet 560405 Bedienungsanleitung

16-Port Fast Ethernet Rackmount PoE Switch • User Manual
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Rackmount PoE Switch, Model 560405.
CONNECTIONS & INDICATORS
Link/Act
Power Link/Act
LEDs
The LED indicators — Power,
PoE, Link/Activity — make it
easier to monitor the switch
and its connections. NOTE:
Only Ports 9-16 can provide
power to a connected device;
all powered devices should
also comply with IEEE 802.3af.
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and
uplink ports are not needed for connections to PCs, routers, hubs, other switches, etc.
Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn't indicate
a link or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord to
connect the device (next to the
On/Off switch on the rear panel)
to an AC outlet. Confirm that the
power LED on the front panel is lit.

INSTALLATION TIPS

Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface with at least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328') of network devices it's to be connected to.
2
ENGLISH
2 4 6 8 10 12 14 16
PoE
PoE
1 3 5 7 9
LED
Power
PoE
Link/Act
16 RJ45 10/100M ports (1-8 shown)
2
11 13 15
1
Status Operation
On Power on
Off Check the AC connection; turn the power on
On Port is linked to a PSE/PoE device
Off No PSE/PoE device is linked
On Valid port connection
Blinking Valid port connection; data transmitted/received
Off No link established
English
16-Port Fast Ethernet
™
4 6 8
3 5 7
On
Off