Operation - Pepcare 18261021 Bedienungsanleitung

05. Operation

WARNING! Only use the device for dry hair.
NOTE: Before using for the first time, switch the device on for
a few minutes. As a result of the manufacturing process, a slight
odour may be produced. This is not harmful and only occurs during
initial use. Ensure that the room has good ventilation.
• Judge your hair sensibly: fine or damaged hair reacts to the treat-
ment more quickly than thick, healthy hair.
• The thinner the strands you are treating, the more intensive the
resultant styling effect.
Switching on and warming up
1. The hair straightener is equipped with a travel lock (4).
To unlock, press the heating plates together and push
the button marked with the symbol
it stops.
2. Place the device on a heat-resistant surface.
3. Connect the mains plug to an easily accessible socket.
4. Use the temperature control (6) to select a temperature between
100 °C and 220 °C adapted to your hair.
5. Push the on-off switch to I to switch the device on. The indicator
light flashes. If the set temperature is reached, the indicator light
lights up permanently.
NOTE: Always select a low temperature when using the device
for the first time.
Select a medium to high temperature to straighten very thick and
curly hair or hair that is difficult to straighten. For normal to slightly
wavy hair, a low to medium temperature is recommended. Note that
high temperatures may affect blond, bleached or coloured hair.

22
in until