Choosing An Interface For Data Connection - Thrane & Thrane EXPLORER 500 Erste Schritte

CHOOSING AN INTERFACE FOR DATA CONNECTION

The EXPLORER 500 has three types of interface for data connection: LAN interface,
USB interface and Bluetooth interface.
The following table shows some characteristics of each interface, to help you
choose the right interface for your application.
Interface Power Consumption
LAN High
USB Low
Bluetooth Medium
MAKING A LAN CONNECTION
To make a LAN connection, simply connect the LAN cable between your computer
and the LAN connector on the EXPLORER 500, and start up the EXPLORER 500 as
described in the beginning of this document.
As soon as the display of the EXPLORER 500 shows READY, the connection is
established automatically.
You are now ready to browse the Internet, check e-mails, send files etc.
NOTE: For information on configuration, refer to the User Manual.
Range
Up to 100 m of cable
Up to 5 m of cable
Wireless connection.
Up to 100 m depending on the transmitter in the
computer and on the transmission conditions.
GB