Kruger & Matz KM0555 Bedienungsanleitung Seite 10

Owner's manual
connect to the speaker (KM Music Box). Played music can be
controlled on the external device or with the buttons on the speaker.
Playing via USB
After plugging the USB drive, the speaker will automatically go to USB
mode. To control played music, use buttons on the speaker.
Playing via AUX
After plugging the cable to the AUX input, the speaker will
automatically go to AUX mode. To control played music, use external
device.
FM Radio
To play the radio, press the mode button, until there is a voice
command "Radio". Press the play button to run automatic scan. Saved
stations can be switched with the next and previous track buttons.
Microphone
After connecting the microphone to the microphone input, it can
be used immediately. Note: microphone cord has to be mono.
TWS function
TWS function allows for playing from one source on two speakers.
After turning on the speakers, simultaneously press and hold the
TWS button on both speakers. Connection will be signaled with an
audio cue. After connecting the external device, the sound will be
EN
played on both speakers.
CHARGING
Low battery level will be signaled with icon on the display. Connect
one plug of the USB cable to the micro USB port of the device,
connect the other plug to the AC charger or a compatible PC USB
port.
10