Laserworld Evolution Serie Bedienungsanleitung Seite 8

Manual: Evolution Series ES-600B
Your device runs in DMX mode if '10' is switched off:
7.
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To define a number use the preceding number and multiply it by 2:
1 2
Switch
Number 1 2
The laser uses 12 DMX channels, so make sure that the next device uses an address that
doesn't overlap with this range.
Channel
1
2
3
4
5
6
7
page 8 / 27
3 4 5
4 8 16
Value
0 - 63
64 - 127
128 - 191
192 - 255
0 - 255
0 - 255
-
0 - 255
0 - 161
161 - 189
190 - 219
220 - 255
0 - 255
0 - 160
161 - 189
190 - 219
220 - 255
11 - 255
0 - 10
11 - 90
6 7 8
32 64 128
Function
Laser off
Sound mode
Automatic mode
DMX mode
Patterns
Strobe (with increasing speed)
-
horizontal movement (not for all patterns)
movement on the X axis
see above; right to left
see above; left to right
see above; changing movements
vertical movement (not for all patterns)
movements on the Y axis
see above; bottom to top, automatically
see above; top to bottom, automatically
see above; changing movements
Zoom / size (not for all patterns)
-
increasing size
9 10
256 Mode Switch