Jumper And Fuses On The Printed Circuit Boards - Siemens 7XT3300-0 Serie Handbuch

7XT3300-0*A00

Jumper and Fuses on the Printed Circuit Boards

Power supply module C53207-A332-B12-, 7XT3300-0*A00/GG and higher
*)
NZT
C53207-A332-B12-
Figure 3 Power supply module with location of the fuses
C53000-B1174-C129-8
Fusible cut-out insert 4AT, type 5 x 20 mm
a) Schurter 0001.2510
b) Siba 179200 4A
c) SOC SHV12 4A
Warning : Only the given fusible cut-out insert
may be used. A safe operation can be
guaranteed by the complete auxilary voltage
range only in such a way.
4AT *)
F301
The fusible link inserts must be replaced only by
the types mentioned. If other types are used , the
parameters and properties given for the device
no longer apply .
F103
4AT *)
F102
F101
English
4AT *)
F601
35