Hama Compact Bedienungsanleitung Seite 4

G Operating Instructions
Thank you for choosing a Hama product. Take
your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• 1x Universal Smartphone Holder
• these operating instructions
3. Safety instructions
• Use the product only for the intended purpose.
• Protect the product from dirt, moisture and
overheating and use it in dry environments only.
• When using this product, observe the applicable
local traffic laws and regulations.
• Do not drop the product and do not expose it to
any major shocks.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately
in accordance with the locally applicable
regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
4. Installation
Warning
• Take care that components such as airbags,
safety areas, controls, instruments, etc. and
visibility are not blocked or restricted.
• While driving a car or using sports equipment,
do not allow yourself to be distracted by
your product and keep an eye on the traffic
situation and your surroundings.
Note
Never apply force when using the product or
during installation.
3
4.1 Mounting the holder
• Remove the protection foil from the suction cup
and position it on a clean, level surface (e.g.
window pane).
• If necessary, attach an adapter plate for suction
cup holders on an uneven, rough surface (e.g.
dashboard).
• Open the clamping device (A1) in order to
position the support arm.
• Close the clamping device (A1) in order to fix
this position.
• To remove the suction cup from the surface, open
the clamping device and remove the suction cup
(A2) completely.
4.2 Mounting the bracket
• Place the cutout(s) of the bracket on the holder.
• Push the bracket down until it clicks into place
/ sits firmly.
4.3 Inserting / removing devices
Note
Always remove your device from the bracket
before you attach it to or remove it from the
holder (suction cup holder).
• Please fold out the feet (B1) before using the
device.
• Press the (B2) button to open the
holding brackets (B3).
• Insert the device and fix it in place by gently
pressing the holding brackets (B3) together.
5. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.