Initial start-up
Assembling the trolley:
Fit the longitudinal axis to the drive axis (Fig. 1).
■
Fit the drive (rear) wheels: Push in the pin on the
■
wheel hub and click the wheel into place (Fig. 2).
Important: Click once = freewheel mode (smooth
manual operation). Click twice = motor mode.
Ensure that both wheels have been correctly fitted
by listening for the number of clicks.
Important: "L" for left and "R" for right are printed on
the inner side of the wheels. Please assemble
the wheels on the correct side.
Attach the control arm and adjust to desired height
■
(Fig. 3).
Lower bag rest: Lift and turn in the direction of travel.
■
Upper bag rest: Click into desired position and secure.
■
Insert the battery into the holder and plug in the
■
cable (Fig. 4).
Scorecard holder: Screw onto the caddy frame with
■
the mounting clamp. Tighten the screws using the
Allen key (Fig. 5).
Umbrella holder (when needed): slide the holder
■
over the mechanism on the steering handle and
turn it clockwise to tighten. The elastic strap secures
the umbrella in case of wind (Fig. 6).
Beverage holder: Screw on to the caddy frame.
■
Tighten the screws using the Allen key (Fig. 7+ 8).
Place your golf bag on the trolley and secure it
■
to the two holders using the elastic strap.
5
6
7
1
2
3
4
8
19