Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Dual-band WLAN AP/Repeater AC600 2.4 and
5 GHz, MU-MIMO, outdoors
Item no. 2373321
Intended use
The product is intended for creating a new network or expanding the existing one. It has 3
modes of operation: Access Point "AP", Repeater and Router.
The "Access Point" mode provides a separate Wi-Fi access point. In this mode the product is
connected to your existing router or network by cable.
The "Repeater" mode serves to strengthen your existing Wi-Fi network and to expand the
coverage area. In this mode the Wi-Fi router is connected wirelessly using Wi-Fi.
The "Router" mode implies using your existing modem for the Internet connection of the de-
vices that are connected to the product. In this mode the product is connected to the modem
with a network cable.
In all modes of operation your devices can be connected to the product via Wi-Fi and, in case
of the Repeater mode, also via LAN.
Configuration can be carried out via the product's web interface. A computer, smartphone or
tablet can be used for this purpose.
The product is powered via the included power adapter and PoE adapter.
The product is suitable for indoor and outdoor use (IP65). However, the power adapter and PoE
adapter can only be used in indoor areas. Contact with moisture, for example, in bathrooms,
must be avoided.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as short circuit, fire or electric shock. Read the operating instruc-
tions carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and pro-
duct names contained herein are trademarks of their respective owners. All rights reserved.
Android
is a registered trademark of Google LLC.
TM
Delivery content
• AP/Repeater
• 2 antennas
• 2 seals
• Mounting bracket
• Fasteners (screws, dowels, cable ties)
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Description of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g., due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
The product should only be used in dry, indoor locations. It must not get damp or
wet.
The product is designed according to Protection Class II.
Safety information
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
• Power adapter
• PoE adapter
• RJ45 cable
• Operating instructions
a) Power adapter
• The design of the power adapter complies with Protection Class II. Only connect
the power adapter to a standard mains socket connected to the public supply grid.
• The mains socket must be located near the product and be easily accessible.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock!
Fully disconnect the mains voltage for the mains socket to which the power ad-
apter is connected (e.g. turn off the corresponding circuit breaker or unscrew the
fuse, and then turn off the residual current circuit breaker). Only then disconnect
the power cord from the mains socket and take the product to a specialist work-
shop.
• Check the power adapter for damage before each use!
• If you detect any damage, DO NOT connect the product to the mains supply!
Danger of death!
• The power adapter and PoE adapter may only be used in dry, enclosed indoor
areas. They must be protected from moisture and dampness; never touch them
with wet hands!
There is a risk of fatal electric shock!
b) General information
• This product is not a toy. Keep it out of the reach of children and pets. An electric
shock can be life threatening!
• Do not leave packaging material lying around carelessly. It may become a dange-
rous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• If you have any questions that are not answered in the operating instructions,
please contact our technical department or third-party specialist.
Product overview
A 5 GHz RP-SMA antenna connector
B 2.4 GHz RP-SMA antenna connector
C 3x Wi-Fi signal strength LEDs
D "Wi-Fi" - Wi-Fi status LED
E "WAN/LAN" - "LAN WAN/POE" connection LED
(H); glows steadily during connection, flashes du-
ring data transfer
F "POWER" - power LED
G "GND" - ground connection
H "WAN/LAN/POE" - this port serves to supply po-
wer via the PoE adapter and for connection to the
existing network, router or modem
J "Reset" button for resetting the product to factory
defaults
Wi-Fi LED (D) signals
Mode
AP/Router
ON
ON
ON
Repeater/
ON
ON
ON
WISP
ON
ON
OFF
ON
OFF
OFF
Flash
OFF
OFF
Installation and connection
We recommend that you temporarily connect the product and configure it first. Then
choose a suitable mounting position for the product and mount it there.
In the instructions below you will encounter the terms such as "AP" (which means
the product), "PC" (comprises computers, laptops, MAC, etc.) and "tablet" (stands
for tablets, smartphones, iPads and iPhones, regardless of the manufacturer/oper-
ating system).
a) Choosing the mounting position
Once configured, the product should now be placed in a suitable mounting position.
When configured in AP mode, the product can be placed almost anywhere as it is connected to
the router by cable. However, make sure you keep a certain distance between the product and
your Wi-Fi router to preclude overlapping Wi-Fi signals.
A
C
D
F
G
H
Descriptions
Wi-Fi signal output power 100%
Very good reception: Signal strength 75% to
100%
Good reception: Signal strength 50% to 75%
Weak reception: Signal strength below 50%
not connected
B
E
J
Werbung
Inhaltsverzeichnis
