Care Instructions - Hesperide ACACIA 171358 Montageanleitung

CARE INSTRUCTIONS

1/ Your product
Proper es
Acacia is a hardwearing exo c wood covered with a protec ve oil.
To begin with it presents a golden brown sheen but it turns to a grey/green tone when exposed to bad weather and UV rays. It nonetheless
retains its proper es.
Polyester is a synthe c fabric that offers good resistance to tearing and rubbing.
Manufacturing and assembly
The manufacturing then assembly of this product requires leaving clearance between the different parts.
It is therefore normal to observe gaps/slack that may reach several millimetres between the different assembled elements (between two slats,
between boards...).
This tolerance necessary for the correct realisa on of your product can be behind li le geometric differences.
This does not lead to any loss of func on of your product.
Irregular appearance
Each product is manufactured and assembled industrially from pa rts whose surface treatment is carried out individually, before assembly.
These metallic elements cannot be free from appearance irregulari es coming both from the surface treatment process and assem bly
opera ons. The final appearance of the product is therefore directly linked to these possible irregulari es.
Regularity of seams
Although we pay special a en o n to the quality and regularity of seams, it is possible to notice that some threads are not cut a er the break
point of the seam. There is no risk of the seam becoming undone. Cut this thread with a simple pair of scissors.
2/ Precau ons for use
Before using this chair for the first me, we recommend that you thoroughly clean the various elements with a cloth dampened in soapy water,
then apply a thin layer of protec ve oil, allow to dry in the shade before wiping with a clean cloth excess oil that would not have penetrated the
wood. Start again a er 48 hours. There is no need to switch your furniture to sandpaper.
We do not recommend the use of a stain or varnish which forms a surface layer and prevents the wood from breathing. It is preferable to apply
an oil which will deeply impregnate the wood.
Be careful, wood is a living material: it may release tannins during the first days of use. We therefore recommend installing the product first
directly on the lawn, un l the wood no longer releases tannins. If you were to put it on a har d terrace, be sure to leave wedges under your feet
for a few days. If in spite of e verything, tannins come to soil your terrace, get to a specialize store to choose the cleaning product most suited to
your type of terrace. But be aware that it is possible to clean the traces of tannins even on the most porous materials, with a high pressure jet.
Do not put hot objects on the table itself, they will leave per manent marks on it (discolora on, deforma on, cracks...). Alway s use table mats.
Do not use a plas c tablecloth on the table. Exposed to UV and heat, it would melt and act as a decal, especially on steel, aluminum and glass.
This would result in irreparable deteriora on of the tray in the form of white streaks. Instead, use a fabric tablecloth.