Vitrifrigo IM CL Montage-, Bedienungs- Und Wartungsanleitung Seite 34

Profile adjustment for Total/Partial recess
To position the profile in total or partial recess, partially loosen the screws of the
profile, sliding it flush with the door or the casing and tighten the screws in the pre-
holes already present in the casing (fig.2).
Figure 2- Installation and positioning of the recessed profile
Fixing the appliance.
To secure the appliance in the built-in space, use only the holes in the relevant
fastening profile (see fig.3)
Figure 3- Installation and fixing via profile
EN