Dmx Linking; Dmx Connection; Mounting Diagram - Chauvet Professional COLORado 2 Solo VW Schnellstartanleitung

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
Power Linking
You can link up to 10 COLORado 2 Solo VW products at 100 V, 12 products at 120 V, 21 products at 208 V, 23 products
at 230 V, or 24 products at 240 V. Never exceed this number. Power linking cords can be purchased separately.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

DMX Linking

The COLORado 2 Solo VW will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.

DMX Connection

The COLORado 2 Solo VW uses a 3- or 5-pin DMX data connection for its DMX personalities: 1Ch, 4Ch, 7Ch, 10Ch, and
10Ch Steady. See the User Manual for information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The COLORado 2 Solo VW supports RDM protocol that allows feedback to make changes to menu
map options. Download the User Manual from
Mounting
Before mounting this product, read the

Mounting Diagram

Mounting clamp
Secure the safety
cable using the
loop on the back
of the product
COLORado 2 Solo VW QRG Rev. 1
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Safety Notes.
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
Safety cable
2