Setting The Alarms - Technoline WT 486 Bedienungsanleitung

SETTING TIME, 12/24HR AND SNOOZE DURATION

Press and hold SET, the m
-01 GMT 00 hour (e.g. UK)
00 GMT + 1 hour (e.g. Germany)
01 GMT + 2 hour (e.g. Finland)

Press SET again, the hour digits flash. Press
will accelerate your setting.

Press SET again, the minute digits flash. Press
or will accelerate your setting.

Press SET again, h
12Hr mode, P (PM) LED will appear on the display to indicate afternoon time. There is no
AM indicator.

Press SET g

Press SET again, month digits flash. Press  or  button to set the date.

Press SET again, date digits flash. Press  or  button to set the month.

Press SET g
time from 5 to 60 minutes.

Press SET again or if no key pressed for approx. 10 seconds to exit the setting mode.

SETTING THE ALARMS


TO SET ALARM 1: Press and hold AL 1.2 / ON.OFF, the A1 LED and the hour digits
flash. Press
your setting.

Press AL 1.2/ ON.OFF once again, the minute digits flash. Press
Alarm 1' minutes. Press and hold

Press AL 1.2/ ON.OFF again, the LED display ho
your alarm, press
bu = wake-to-buzzer
rd = wake-to-radio

Press AL 1.2/ ON.OFF g
1-5 = Monday to Friday only
6-7 = Saturday and Sunday only
1-7 = Monday to Sunday
1-1 = single-day alarm : after the alarm sounds and is stopped, the A1 LED goes off.
Press AL 1.2/ON.OFF once to re-active another single-day alarm of Alarm 1.

TO SET ALARM 2: Press AL 1.2/ ON.OFF again, the A2 LED and the hour digits flash.
Press or

To store your alarm settings, press SET once (or if no button is pressed in around 10
seconds), your clock radio will return to normal time display mode.
When the related alarm is turned on, it will be indicated by the appearance of the A1 and
/ or the A2 LED on the left side of the display.
Note: Alarm function only works with AC/DC adaptor only.
TO TURN ON / OFF ALARM 1 AND 2
1. Press AL 1.2/ON.OFF once to activate Alarm 1, A1 LED appears.
2. Press AL 1.2/ON.OFF once again to activate Alarm 2, A2 LED appears.
3. Press once again to activate both Alarm 1 and 2. Both A1 and A2 LED' appear.
4. Press once again to deactivate both alarms, both A1 and A2 LED' disappear.
STOPPING AND RESETTING THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related A1 or A2 LED flashes. Press the RADIO / SLEEP or
AL 1.2/ ON.OFF once to stop the alarm and reset it to come on the following day. After that A1
and / or A2 LED remains on the display.
g ch
p y ho "24Hr" flash, press
flash. Press  or  button to set the year.
, "2016" g
, h p y ho "05"
or to set the Alarm 1' hours. Press and hold
or to select :-
, "1-7" f
to set the Alarm 2' hours. The repeat step 2 to 4 above to set alarm 2.
g o "00". Press
or to set the hours. Press and hold
or to set the minutes. Press and hold
or
f h
. Press
or will accelerate your setting.
"bu". To select the sound sources of
h , Pr
or
GB 3
or to set the time zone.
to select 12Hr  24Hr. In
or to select your snooze
or will accelerate
or to set the
o c "6-7" or "1-5" or "1-1".
or