Inline SmartHome 40161 Bedienungsanleitung Seite 18

www.inline-info.com
1. Press the power button for about 5 seconds
until a second beep is heard and the blue
status LED fl ashes rapidly.
2. Press the power button again for about 5
seconds until a second beep is heard and the
blue status LED now fl ashes slowly.
3. In the APP press the „+" sign (top right).
4. To add the appliance manually, please select
„Fan" from the „Small household appliances"
section.
5. Now select „Other methods" in the uper
right corner of the APP and then select „AP
mode".
6. Confi rm the following step.
7. Select your WLAN network and enter your
WLAN password. „Confi rm" it.
8. The fan now acts as an access point and
creates its own WLAN, to which you must
connect your smartphone or tablet directly.
9. So click on „Connect now". In the next
window the available WLAN network will
appear, name of the fan is e.g. „SmartLi-
fe-8DB6", the letters and numbers will be
different.
10. Select it to establish a direct connection.
You can ignore the message from your
6
smartphone or tablet that there is no Internet
connection.
11. Now go back a few steps until the connection
is displayed in the APP and the fan is suc-
cessfully integrated into the existing WLAN
network.
12. The APP now connects to the device, wait
until the display of your smartphone confi rms
this.
13. After a successful connection the blue status
LED stops blinking and now lights up.
14. You can assign your connected device direct-
ly to a room, but you can also simply ignore
it. The device then appears in the device
overview under „All devices".
Basically,
tions for several families can be stored
in this APP. The administrator has aut-
horization to create families and access
all families.
settings/scenarios/automa-