Inline SmartHome 40161 Bedienungsanleitung Seite 17

6. Select your WLAN and enter your WLAN
password. „Confi rm" to allow the device to
connect to your network.
info@inline-info.com
7. The APP now connects to the device, wait
until the display of your smartphone confi rms
this.
8. After a successful connection the blue status
LED stops blinking and now lights up.
9. You can assign your connected device direct-
ly to a room, but you can also simply ignore
it. The device then appears in the device
overview under „All devices".
During setup, the fan should be near
your router to have a strong WLAN sig-
nal. If the automatic or manual addition
still does not work properly, please try
the AccessPoint mode as described
below.
5