How To Cook - Newlux SMARTCHEF V50 BLACK Bedienungsanleitung

HOW TO COOK

Cooking with Newlux SmartChef V50 is very simple: just enter the ingredients for the recipe, set the menu,
time and temperature and wait for the appliance to cook for you. Once the cooking process is finished, the
appliance will automatically keep the food warm.
1. Clean the recipient and place it in the space in the Newlux Cooker with the ingredients.
2. Select a menu: Use the menu button to select the type of cooking you prefer, robot will list.
3. Choose the power: Once the cooking time has been set, use the Temp button to adjust the cooking
temperature, always choose Temp. 2 for any menu, 3 for the frying menu and 1 for heat.
4. Select cooking time: Once the menu has been selected, increase the cooking time by pressing + or reduce
it by pressing -. Between 1 and 99 minutes can be selected in all menus except for the slow cooking menu
in which the time intervals are 10 minutes, from 10 through to 990 minutes, and oven baking up to 330
minutes.
5. Cook: Once the cooking power has been established, if you wish to start cooking press the Cook button,
but if you want to access the programming mode, select the RSV button.
6. Warm: If you want to keep food warm, select the Warm button two times, will enter a reheat function until
you cancel this program by pressing OFF.
7. Whilst your Newlux Multi-purpose Cooker is cooking, the screen will show a circling cursor and once the
ideal cooking conditions have been reached, the remaining cooking time will be shown on the display,
which counts down to the end of the cycle.
8. When the cooking cycle has ended, the opening process will be shown on the display screen ----, and you
may now open the lid.
9. After each menu, the Keep Warm menu will connect automatically for an indefinite time, to keep your
food warm
IMPORTANTE: For safety reasons, do not remove the steam valve when cooking.
| 26