Menus And Control Panel - Newlux SMARTCHEF V50 BLACK Bedienungsanleitung

MENUS AND CONTROL PANEL

IMPORTANT: DO NOT TOUCH WITH WET HANDS. If the display is wet,
dry thoroughly before use, as this may cause operating problems.
Functions:
ON: Press this button to start the cooking cycle, press it after selecting
the menu or the waiting time.
OFF: Press this button three times to cancel any function. When the
warm function is on, press OFF to cancel , the display shows "0000".
WARM: This function connects automatically after each menu cycle
when the cooker finishes cooking and indefinitely until you cancel it.
Press this button to select the keep warm function, in display "----".
MENU: Press this button to select the required menu. It will bright.
TEMP: Press this button to change the power / temperature at any time. The cooking power is indicated with
the digits shown on the left of the display screen. There are a total of 3, with 1 being the lowest and 3 the
highest. Temperature 2 is selected by default (for any menu) except for frying, that you can use temperature
3.
COOKING TIME: Press this button to increase the cooking time before select the Menu (minutes). If you hold
down the button will increase the time in 10 minute intervals.
RSV: Press this button to set the waiting time, the robot will cook automatically. If you hold down the button will
increase the time in 10 minute intervals.
| 24
RSV COOKING
Rice Oven
TIME TIME
Fast
Stew
Cooking
Slow
Fried
Cooking
Grill
Soup
ON/OFF
TEMP
MENU
WARM