Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 2
1. Pairing
1. Press and hold the "
Green LED will blink alternately.
2. Select "EDIFIER W280NB" in your device setting
to connect. Green LED will blink twice per 5s
after connected.
Pairing for the first time
1. Power on for the first time. Red and Green LED will
blink alternately.
2. Select "EDIFIER W280NB" in your device setting to
connect.
Note:
For subsequent use, the headphone will auto-connect to
device used last time.
2. Reset
1. Power on and disconnected to any devices.
2. Simultaneously press and hold the " + " " - " buttons
for 5s to clear pairing records.
3. Green LED will blink 6 times rapidly then off when
successful.
3. Dual Connectivity
1. Pair device A with the headphone. Upon successful
press and hold the "
2. Select "EDIFIER W280NB" in device B to connect.
3. Select "EDIFIER W280NB" in device A to connect
manually.
4. Green LED will blink twice per 5s when successful.
4. Controls - Power ON/OFF / Modes
5. Controls - Volume / Music / Call
x1
x1
Note:
1.
: Press and hold.
2. Please do not charge the headphone when there is
sweat or other liquids inside the charging port,
which may damage the headphone.
3. Images are for illustrative purposes only and may
differ from the actual product.
4. Download Edifier Connect App for more
customizable control settings.
Input:5V
For more information, please visit our website:
@Edifierglobal
Model: EDF200039
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2021 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change
from time to time without prior notice.
Products of EDIFIER will be customized for different
applications. Pictures and illustrations shown on this
manual may be slightly different from actual product.
If any difference is found, the actual product prevails.
W280NB
Wireless Sports Headphones with Active Noise Cancellation
500mA
@Edifier_Global
Manual
" button for 3s. Red and
5s
A
3s
B
" button for 3s again.
3s
EDIFIER W280NB
EDIFIER W280NB
2s
x1
x1
x1
x2
@Edifier_Global
x1
2s
x1
x2

Werbung

loading

Inhaltszusammenfassung für EDIFIER W280NB

  • Seite 1 Pairing for the first time 1. Power on for the first time. Red and Green LED will blink alternately. 2. Select "EDIFIER W280NB" in your device setting to connect. Note: For subsequent use, the headphone will auto-connect to device used last time.
  • Seite 2: Zurücksetzen

    1. Koppeln Sie Gerät A mit den Ohrhörern. Nach erfolgreicher Kopplung drücken Sie die Taste „ ” nochmals für 3 s gedrückt. 2. Wählen Sie „EDIFIER W280NB“ auf Gerät B zum Koppeln. 3. Wählen Sie „EDIFIER W280NB“ auf Gerät A zum manuellen Koppeln.
  • Seite 3 Première association 1. Effectuez la première mise sous tension. Les voyants LED Rouge et Vert clignoteront alternativement. 2. Sélectionnez « EDIFIER W280NB » dans les paramètres de votre appareil pour vous connecter. Remarque: Le casque se connectera automatiquement au dernier appareil associé...
  • Seite 4 " " com sucesso por 3s novamente. 2. Selecione "EDIFIER W280NB" no dispositivo B para conectar. 3. Selecione "EDIFIER W280NB" no dispositivo A para conectar manualmente. 4. O LED verde piscará duas vezes por 5s quando executado com sucesso.
  • Seite 5 W280NB Wireless Sports Headphones with Active Noise Cancellation Manual 1. ペアリング 1.「 」ボタンを3s押し続けます。 赤色と緑色の LEDが素早く交互に点滅します。 2. 接続設定するデバイスで「EDIFIER W280NB」 を選択します。接続後、 緑色LEDが5sで2回点滅します。 初回のペアリング 1. 初めて電源を入れる。 赤色と緑色のLEDが素早 く交互に点滅します。 2. 接続設定するデバイスで「EDIFIER W280NB」 を選択します。 注: 2回目の使用以降は、 ヘッドホンは前回使用したデ バイスに自動的に接続されます。 2. リセット 1. 電源を入れ、 全てのデバイスから接続解除します。 2.「 + 」と「 - 」のボタンを5s同時に押し続け、 ペアリ...
  • Seite 6 " " durante 3s otra vez. 2. Seleccione "EDIFIER W280NB" en el dispositivo B para conectar. 3. Seleccione "EDIFIER W280NB" en el dispositivo A para conectar manualmente. 4. El LED Verde parpadeará dos veces cada 5s cuando sea correcto. 4. Controles - Encendido/ Apagado / Modos 5.
  • Seite 7 1. Associare il dispositivo A alle cuffie. In caso di procedura avvenuta correttamente premere e tenere premuto nuovamente il pulsante " " per 3 secondi. 2. Selezionare "EDIFIER W280NB" nel dispositivo B per la connessione. 3. Selezionare "EDIFIER W280NB" nel dispositivo A per la connessione manuale.