Herunterladen Diese Seite drucken

Sygonix 2380477 Kurzanleitung Seite 3

Rfid-zutrittssystem

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Quick Start Guide
RFID access system
Item no. 2380477
Intended use
This product is designed to prevent unauthorised access to doors (e.g. in an office) and to
activate/disable alarm systems. The product enables to save up to 2000 users with different
transponders.
Holding a paired transponder in front of the reading surface activates a potential-free relay
changeover contact (see contact rating under "Technical data"). This can be used, for example,
to control a door opener or an alarm system.
The product is intended for vertical installation on a wall and is suitable for indoor and outdoor
use (IP 66).
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short circuit, fire or electric shock. Read the operating instruc-
tions carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and pro-
duct names contained herein are trademarks of their respective owners. All rights reserved.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g., due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Delivery content
• Access system
• Fasteners (2x special screws with matching L-key, 4x screw head stickers, mounting frame
with 4x screws and 4x dowels)
• Master transponder
• 1N4004 diode (for relay changeover contact)
• IR remote control (with one CR2025 lithium battery)
• Quick guide
• Programming guide
Installation, connection, getting started, programming and
operation
Detailed important instructions are downloadable from our website (enter the
item number to call up the page with product details).
Alternatively, follow the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
There you will find the latest operating instructions for download.
Safety information
Damage caused due to failure to observe these instructions will void the
warranty. We shall not be liable for any consequential damage!
We shall not be liable for damage to property or personal injury caused by
incorrect handling or failure to observe the safety information! Such cases
will void the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Protect the product from extreme temperatures, impacts, flammable gases, va-
pours and solvents. The access system is suitable for indoor and outdoor ins-
tallation and use (IP66). The supplied IR remote control must be protected from
moisture and humidity.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product. Do not place the product under any mechanical stress.
• Do not mount or connect the product when it is connected to a power supply.
• The contact rating for the changeover contact is specified in section "Technical
data" and must not be exceeded. Never switch the mains voltage, as this can
cause life-threatening electric shock!
• Always observe safety information and operating instructions for the other devices
(e.g. door opener, alarm system) to which the product is connected.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation of the appliance can no longer be guaranteed if
it shows visible signs of damage, malfunctions, has been exposed to unfavourable
storage conditions or significant transport loads.
• For installations in industrial facilities, follow the accident prevention regulations
for electrical systems and equipment issued by the national safety organisation or
the corresponding national authority.
• Do not leave packaging material lying around carelessly. It may become a dan-
gerous toy for children!
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you are not sure how to operate the product correctly, or if you have any ques-
tions that are not answered in these operating instructions, contact us or another
specialist.
b) Battery safety information
• Keep batteries out of the reach of children.
• Do not leave batteries lying around in the open; there is a risk of them being
swallowed by children or pets. If swallowed, consult a doctor immediately, it could
be fatal!
• Always ensure that the battery in the IR remote control is inserted with the correct
polarity (observe the plus/+ and minus/- symbols).
• Batteries must not be short-circuited, opened, taken apart or thrown into a fire.
This may cause a fire or explosion!
• Never attempt to recharge non-rechargeable batteries, as this may cause an ex-
plosion.
• Old or depleted batteries may emit chemical liquids that cause damage to the
product. Therefore, if the device is not to be used for a long time (e.g. storage),
remove the battery from the IR remote control.
• Leaking or damaged batteries can lead to caustic burning upon skin contact.
Therefore, use suitable protective gloves.
• Liquids leaking from batteries are very chemically aggressive. Objects or surfaces
coming into contact with these liquids could be severely damaged. Therefore,
store batteries in a suitable location.
• For details on how to dispose of batteries in an environmentally friendly manner,
refer to the "Disposal" section.

Werbung

loading