Inhaltsverzeichnis
Werbung
T
1.
he appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
C
2.
hildren shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
C
3.
hildren of less than 3 years should be kept away unless continuously supervised.
C
4.
hildren aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been
placed or installed in its intended normal operating position and they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and
less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
C
AUTION — Some parts of this product can become very hot and cause burns. articular attention has to be given
5.
where children and vulnerable people are present.
T
6.
he heater must not be located immediately below a socket-outlet.
W
7.
ARNING: In order to avoid overheating, do not cover the heater.
D
8.
o not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
I
9.
f the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
T
10.
his product is intended for household use only and not for commercial or industrial use.
D
11.
o not use outdoors.
U
12.
nplug from outlet when not in use or before cleaning. Allow to cool before putting on or taking off any parts.
ASSEMBLY OF THE HEATER
Assemble the body frame and the base plate together as the following sequences. Remove the mounting screw from the
lower part of the body frame.
Insert the power cord through the slot placed in the middle part of the basement and then assemble the body frame to
the base plate.
Secure the body frame to the base plate by means of the two mounting screw previously removed. Insert the power cord
through the suitable slots and then fix it by the clamp.
HOW TO USE
1.Plug into the mains socket.
2. Switch on the function selector
Werbung
Inhaltsverzeichnis
