Technical Data; Measuring Input - Camille Bauer SINEAX C 402-1 Betriebsanleitung

4. Technical data

Measuring input

DC current: Standard ranges
0...20 mA, 4...20 mA, ± 20 mA
Limits
0...0.1 to 0...50 mA
also live zero,
initial value > 0 to ≤ 50%
of end value
– 0.1...0...+ 0.1 to
– 50...0...+ 50 mA
also bipolar asymmetric
= 15 Ω
R
i
DC voltage: Standard ranges
0...10 V, 2...10 V, ± 10 V
Limits
0...0.06 to 0...40, Ex max. 30 V
also live zero,
initial value > 0 to ≤ 50%
of end value
– 0.06...0...+ 0.06 to
– 40...0...+ 40 V,
Ex max. – 30...0...+ 30 V
R = 100 kΩ
i
Overload capacity: DC current
continuously 2-fold
DC voltage
continuously 2-fold
Contact outputs A1/A2
SINEAX, housing S17: 2 relay outputs,
1 potentialfree changeover contact
per trip point
Trip point type: Switching function adjustable by
jumpers ST2 and ST6 as low or high
trip point (see Fig. 2)
Trip point of measured variable
Low trip point
100 %
H
GW
0 %
H Hysteresis, GW Trip point, G Safe cond., S Alarm cond.
Fig. 2. Switching function, according to trip point type.
Trip point adjustment: By 12-turn potentiometer
Adjusted trip point measurable on
test sockets with separate voltmeter
R > 10 MΩ,
i
0 ... 1 V
Test switch Ø 2 mm
18
All manuals and user guides at all-guides.com
High trip point
GW
H
1 and
2 for GW1 and GW2
0 ... 100%
Hysteresis: Standard 1%,
between > 1 and 10% acc. to
order
Energizing and
deenergizing delays: Standard 0,2 s
between 0.1 and 10 s acc. to
order
Sense of relay action: Adjustable by jumpers J4 and J8
(see Fig. 3)
Display of switching
state: GW1 and GW2 by yellow LED's
1 and
by jumpers J5 and J9 (see Fig. 3)
AC: ≤ 2 A / 250 V (500 VA)
Contact rating:
DC: ≤ 1 A / 0.1 ... 250 V (30 W)
Gold flashed contacts silver alloy
(Relay approved by UL, CSA, TÜV,
SEV)
Power supply H
AC/DC module (DC and 45...400 Hz)
Table 2: Nominal voltages and tolerance
Nominal
Tolerance
voltage U
N
24... 60 V
DC / AC
DC – 15...+ 33%
AC ± 15%
85...230 V
1
DC / AC
24... 60 V DC – 15...+ 33%
DC / AC AC ± 15%
85...230 V
± 10%
AC
85...110 V
–15...+ 10%
DC
Power consumption: ≤ 1.2 W resp. ≤ 3 VA
Accuracy data (acc. to DIN/IEC 770)
Reference conditions: Ambient temperature 23 °C, ± 1 K
Accuracy of the
pick-up value: Max. ± 1%
Repeatability of
the setting: Max. ± 0.2%
Temperature influence: < ± 0.1% per 10 K
Installation data
Mechanical design: Housing S17
Dimensions see Section "12. Dimen-
sional drawings"
Material of housing: Lexan 940 (polycarbonate)
Flammability class V-0 acc. to UL
94, self-extinguishing, non-dripping,
free of halogen
For power supplies > 125 V, the auxiliary circuit should include en
1
external fuse with a rating ≤ 20 A DC.
2, display mode adjustable
Instruments version
Standard
(Non-Ex)
Type of protection
"Intrinsic safety"
[EEx ia] IIC