physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
The appliance should not be operated by means of an external timer‐switch or by means
of a separate system with remote control not originally belonging to this appliance.
•
This appliance is intended to be used in household and similar applications such as: staff
kitchen areas in shops, offices and other working environments; farm houses; by clients
in hotels, motels and other residential type environments; bed and breakfast type
environments.
•
This heating device is not suitable for assembling in vehicles and machines.
•
means " DO NOT COVER ".
Warning:
•
In order to avoid overheating, do not cover the appliance.
WHEELS ASSEMBLY
1. Assemble the four wheels to the two base shelves.
2. Traverse the clips through the appliance body and base shelves.
3. Tighten the screw.
Using the Appliance
Set the thermostat to the minimal position and insert the plug to the power supply.
Turn on the power switch: I=800W; II=1200W; I+II=2000W
The thermostat will automatically maintain your desired room temperature.
Turn the thermostat knob in a clockwise direction to the max position.
Once the room temperature has reached the desired value, turn the thermostat knob
slowly in anti‐clockwise direction until you hear a "click" sound; this is the setting
temperature.
The appliance will automatically maintain the setting temperature. It will switch on
when the room temperature is below the setting, and switch off if it is above the
setting.
NOTE:
The room must be in a good tight condition; if not, the heating results will be
- 6 -