Focal AUDITOR ACX 100 Gebrauchsanleitung Seite 27

AUDITOR
U s e r m a n u a l
Please validate your Focal-JMlab warranty,
it is now possible to register
your product online:
www.focal.com/warranty
Thank you for choosing Focal kits AUDITOR ACX 100, AUDITOR
ACX 130, AUDITOR ACX 165, AUDITOR ACX 165 S, AUDITOR ACX
570, AUDITOR ACX 690, AUDITOR ASE 130, AUDITOR ASE 165,
AUDITOR ASE 165 S, and for sharing our passion for sound and
for music. Designed using acoustic technologies, these speakers
integrate Focal's perfectionist believes, developing products with
high power handling, and unrivalled sound quality. To obtain the
best results from this product, we recommend that you follow
carefully all the information contained in this user's manual. If not
correctly followed, any fault observed may not be covered by the
warranty.
Important recommendations
First of all, check the space available for fitting the speaker drivers
(refer to the plans on the packaging) then proceed with the cutting
required. If mounted in the factory location, check that there is
sufficient space between the speaker driver and the protective grille.
• Clear the speaker drivers of any metal shavings and dust particles.
• Clean carefully before mounting the speaker drivers.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by
the official Focal distributor in your country. Your distributor can
provide all details concerning the conditions of warranty. Warranty
cover extends at least to that granted by the legal warranty in force
in the country where the original purchase invoice was issued.
Our policy of continual product improvement means
that Focal-JMlab reserves the right to modify the technical specifications
of its products without notice. Product may vary from images.
™
27