Multi-Telephone System - Fermax DECT 1206 Bedienungsanleitung

MULTI-TELEPHONE SYSTEM

Up to 5 terminals may be registered in the same base, between panels and telephones,
with a maximum of 2 panels per base (main and secondary panels).
Each terminal registered occupies a memory position in the base. There are 5 memoery
positions in each base (positions 1 to 5):
- Memory position 1 is taken up by the main telephone.
- Memory position 1 is taken by the main panel.
- Positions 3, 4, and 5, initially free, are used to register additional terminals.
If the 5 memory positions are occupied, one of them must be deleted in order to be able
to authorise the new terminal.
To register a new terminal (Telephone or Panel), there must be free memory positions
available. If all the memory positions are occupied, you must delete one of them in order
to be able to register the new terminal.
To delete a memory position, if required, see section
Terminal)".
VERY IMPORTANT NOTE:
* If the telephone as registered as MAIN telephone (memory position = 1), you will be
able to answer calls from the panel. If its is registered as an ADDITIONAL Telephone
(memory positions 3, 4 or 5), CALLS CANNOT BE ANSWERED FROM THE PANEL.
8
All manuals and user guides at all-guides.com
„Cancel a Telephone (Delete a