Remington Touch Control MB4560 Bedienungsanleitung Seite 5

ENGLISH
, CAUTION
, WARNING
via the USB port.
, CORDLESS USE
cordless mode for 50 minutes.
F INSTRUCTIONS FOR USE
trimming.
middle position. This will turn the LCD display on and enable height
adjustments and boost adjustments to be made.
switch between these, press and hold the mode button for 3 seconds. The
increment that the trimmer is now set at will be displayed (or lash) for 1
second.
, USING THE TOUCH SCREEN
with 0.1mm increments, simply by pressing the arrows on the touch
screen. Press and hold the arrow up to increase the cutting length and down
to decrease it. The setting number will appear on the digital display.
position slide switch in the middle position. The display will indicate the
level.
position slide switch to the last position (the furthest down) to lock the
cutting length and turn the motor on.
slide switch is set to the middle position. Adjust the cutting length and or
boost level by pressing the arrows or boost button on the touch screen.
set to lock, the last position (furthest down). This is to ensure the cutting
length does not adjust whilst you are cutting your hair.
hair length selector. To achieve 0.4mm, the comb must be removed.
5