Zelmer ZHC6205 Benutzerhandbuch Seite 10

EN
warranty null and void. Only an authorised technical support service centre
may carry out repairs on this product.
B&B TRENDS S.L. disclaims all liability for damages that may occur to
people, animals or objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
Prior to turning on the device, remove the protective cover (4) and set the
desired trimming brush (5), taking it by the sides (fig.1) and adjusting the
lower section of the blade. We recommend starting off by selecting the
longest one 12mm, then changing to the smaller ones 9, 6 or 3mm until you
achieve the desired length.
In order to remove the cutting brush, pull upwards (fig. 2.) Connect the
product to the appropriate mains.
Turn on the product by selecting the on switch and placing it in the I (2) position.
Select the 0(2) on switch in order to turn off the product before you
disconnect the device from the mains.
HOW CUT THE HAIR:
fig. 1 fig. 2
10