Technical Specification - Plugger Studio MS4-BT Bedienungsanleitung

LINE audio output (5)
Line output for sending the audio signal to an amplifier.
To make this connection, you need an RCA cable.
BT CONNEXION
The Bluetooth function is automatically in pairing mode. The front panel LED (3) is red.
Place the speaker and the Bluetooth device (phone or music device) within 5 meters of each other;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please consult the
manufacturer's instructions on how to enable Bluetooth on your device.
-
Once you have enabled Bluetooth on your device, select the pairing name "MS4-BT" from the list of available Bluetooth devices,
then press to connect.
After successful pairing, the red LED will turn blue. The connection is then established successfully.
If necessary, enter the password "0000" to confirm the pairing.
LINE INPUT (4)
It will be automatically switched to LINE mode when the AUX IN cable is inserted into this product.
Adjust the volume knob (1) to increase or decrease the output volume.
Note: all other functions will not be used under the AUX IN model.

TECHNICAL SPECIFICATION

Power supply
Power consumption
Frequency response
Speakers
Musical Max power
Line input
Dimension
Net weight
The EU declaration of conformity is available on our website www.msc-distribution.com The EU declaration
of conformity is available on our website www.msc-distribution.com
Input 100-240V ~ 50/60Hz
36W
70Hz – 20KHz
4'' Woofer + 1''silk dôme tweeter
2 x 18W (A/B)
RCA
140 x 150 x 220mm (x2)
3.9KG
6