Technical Data - Abexo RM 620 Bedienungsanleitung

RM620
The RM620 microwave movement detector controls the opening of factory gates and
automatic doors. It works in the K band. It can be installed at a height ranging from 3 to 6
metres and guarantees the surveillance of an area from 3 to 30 square metres .
The device will be automatically activated by moving persons or vehicles within the
controlled perimeter.
RM620 has been developed using planar technology, and can be set in mono-
directional (to detect movement either in forward or backward direction) or bi-
directional (activated by movement in both directions). A microprocessor processes the
signals received – generated through a Doppler effect – and sends an OK to the opening
command.
A LED on the front panel indicates that movement has taken place inside the controlled
area.

TECHNICAL DATA

Power voltage
Power current
Operative frequency
Output Power (EIRP)
Range
Relay control time
Degree of protection
Installation height
Detectable speed
Relay contact
Vertical directionality
Horizontal directionality
Operating temperature
Dimensions/weight
Warranty
NOTE: A SELV power source must be used (certified power supply unit or safety transformer) in
compliance with CEI EN 41003:1993 standard.
We hereby declare that RM620 complies with the essential requirements of Directive 99/05/EC (R&TTE)
harmonised radio standard pursuant to Art. 3.2 of Italian Law No. 269 dated 9.5.2001: EN300440-2 V 1.1.2
®
www.abtecno.com
12 – 24 V /12 - 30 V
AC DC
max. 50 mA
9.90 GHz
≤14 dBm
1 – 10 m adjustable
1 – 6 s adjustable
IP 65
max. 6 m
0.1 m/s minimum
1A - 24 V
AC/DC
0-60°
+/- 45°
- 20 °C to + 50 °C
160x95x110 mm / 500 g
24 months
www.aperioaccess.it
ENGLISH
5
5