Storch DMS 25 PRO Bedienungsanleitung Seite 45

Safety
Prior to the initial operation of the machine, the operating instructions have to be studied carefully. Trained and
instructed staff only may be employed on the machine.
The device possesses a voltage range which can pose an electrical hazard to humans and animals. It should only
be opened and/or disassembled by authorised persons.
The operating staff is responsible for the maintenance and servicing. The machine has to be checked for noti-
ceable damage in regular intervals (prior to every startup, if possible).
No modifications, such as changes or extensions, may be carried out on the machine.
Use original spare parts only as otherwise the perfect function of the machine is not ensured. If you do not use original
spare parts, risks to persons and property cannot be ruled out.
The machine can only be operated on the mains power, if all rotating sections have been secured by closing and safe-
guarding the corresponding components.
The machine must set up so as to rule out rolling or tipping over.
The machine may be serviced only by trained specialist staff.
The machine may be operated in a technically perfect condition only for the intended purpose adhering to the instruc-
tions in the operating instructions.
Wear work gloves and protective work shoes during assembly and disassembly work.
In case of longer breaks/interruptions and absence of the operating staff, clean the machine after disconnecting from
the mains and locking against switching back on.
Also disconnect the machine from the mains and lock against switching back on if machine components, such as the
mixing pipe or safety guards, are opened for cleaning.
During cleaning of the machine, protect the electric connections against direct contact with water.
Operate the machine through a residual current circuit breaker with earth monitor only.
For cleaning work, always disconnect the machine from the mains.
Do not reach into the material outlet when the machine is running.
The machine has not been fitted with a suspension device for crane transport!
Observe the general safety and accident prevention regulations for the building trade.
Functions
The flow mixer comprises a storage tank which is separate from the mixing pipe. During operation, the dry material is
fed into the mixing pipe by means of the transport/dosing shaft. In the mixing pipe, the mortar is mixed after water has
been added.
45 Translation of the original instruction