Bellman & Symfon BE1491 Benutzerhandbuch Seite 73

Changing the radio key
If you install multiple systems, you can set
a unique radio key for each system to avoid
interference. Move any radio key switch
the up=on position to change radio key.
Please note:
All Visit products within the same system
must be set to the same radio key in order to
operate as a group.
All radio key switches are positioned
down=off per default.
141 Installer's Guide
A
On
to
A
Off
Customizing the signal
The baby monitor controls the signal pattern on
the receiver. By moving a signal switch
you can set a unique signal for each baby. Note
that you need to move the other switches down.
B
up=on
B
On
Off
Installer's Guide 142