The Power Cord Shall Be Connected To An Omnipolar - Seenergy RETRO Bedienungsanleitung

as failure to perform regular cleaning may result in fire risk.
• Make sure all of the appliance components are not damaged. In
such a case, do not carry out installation and contact a qualified
technical assistance center.
• Qualified installers shall make any necessary carpentry and
installation works in full compliance with directives in force.
• Do not connect the appliance to the electrical network during
installation.
• Disconnect the appliance from power supply before carrying out
any cleaning or maintenance operation.
• CAUTION: failure to install screws or fixing devices according to
these instructions can cause electrical hazards.
WARNINGS FOR ELECTRICAL CONNECTION
• Electrical connections shall be approved by a qualified electrician
before using the appliance. Electrical connection shall be
performed by just one qualified electrician, who will be
responsible for proper electrical connection of the appliance to
power supply. Before connecting the appliance to the electrical
network, check if voltage, frequency and power values specified
in the rating label of the appliance are compatible with home
power supply and socket.

• The power cord shall be connected to an omnipolar

magneto-thermal breaker with a switch-contact gap of at least 3
mm.
11