Bios Setup - Werock Rockbook X130 Bedienungsanleitung

7.
Install the new SSD module.
8.
Tighten the screws to secure the SSD module.

BIOS Setup

BIOS Setup Utility is a program for configuring the computer's BIOS (Basic Input/Output System) settings.
BIOS is a software layer, also called firmware, that translates instructions from other software layers into
instructions that the computer hardware can understand. BIOS settings are required by your computer to
identify the types of devices installed and to set up special functions. This chapter tells you how to use the
BIOS Setup utility.
When and how to use it
You need to run the BIOS Setup utility when:

You see an error message on the screen prompting you to run the BIOS Setup Utility.

you want to restore the factory default BIOS settings.

You want to change some specific settings according to the hardware.

You want to change some specific settings to optimize the system performance.
To run the BIOS setup utility:
1.
Click → "Settings" → "Update & Security" → "Restore". Under Advanced Startup, click "Restart
now". In the Startup Options menu, click Troubleshooting → Advanced Options → UEFI Firmware
Rockbook X130 User Manual
87 / 92