Using The Fingerprint Scanner; Service And Maintenance - Werock Rockbook X130 Bedienungsanleitung

Using the fingerprint scanner

The fingerprint scanner (if your model has this feature) provides a strong authentication mechanism based
on fingerprint recognition. You can log into Windows and disable the lock screen with a registered fingerprint
instead of a password.
For optimal performance, both the scanning surface and the finger should be clean and dry. Clean the
scanning surface if necessary. You can use tape to remove dirt and oil from the scanner surface.
It is not recommended to use the fingerprint scanner in temperatures below freezing. The moisture on your
finger may freeze on contact with the metal surface of the scanner, which may cause it to malfunction; also,
touching frozen metal with your finger may cause frostbite.
You must create a user account and password in Windows before you can create a fingerprint.
The fingerprint login process will take some time because the system needs to complete the hardware
device and security mechanism verification before it starts the fingerprint sensor.
Enroll a fingerprint
1.
Click the Windows icon
2.
Click Setup on the right side under Fingerprint.
3.
Follow the on-screen instructions to complete the process.

Service and maintenance

Notes on service and maintenance work
Only experienced electronics personnel should open the computer housing. Do not open the housing. It
does not contain any parts that can be maintained by the user. Opening the housing will void the warranty.
Always completely remove the power cable from the case when working with the hardware. Always ground
yourself to remove static charges from your body before touching internal parts. Modern electronic devices
are very sensitive to electrical charging. As a safety precaution, always use a grounding bracelet. Place all
electronic components on a static-dissipative surface or in a static-shielded bag if they are not inside the
housing.
Trennen Sie das Gerät immer von Ihrer Stromversorgung bevor sie es reinigen. Benutzen Sie
keine Säure, Ätzflüssigkeit oder Spraywaschmittel zur Reinigung. Eine gute Option ist es ein feuchtes
Tuch zu verwenden.
Rockbook X130 User Manual
→ "Settings" → "Accounts" → "Login Options".
82 / 92