Denver MIR-260 Bedienungsanleitung Seite 11

Bluetooth mode
Press Menu button until Bluetooth is selected.
1
2 From your Bluetooth device, search for available Bluetooth devices.
3 Select "MIR-260" and connect.
Sleep timer
This feature enables your radio to switch to standby mode after a set sleep time.
1 Press Sleep button, Turn the SCROLL + / - knob to select from below options: Turn Off, 15, 30, 45,
60, 90, 120, 150 and 180 minutes. Press the OK/SNOOZE button to confirm the selected one. The
sleep icon and sleep time will be shown on the display.
Alarm setting
Your radio includes dual alarms. Before setting an alarm, make sure to set the clock first.
1. Press the ALARM button to go to enable the alarm function.
2. Turn the SCROLL + / - knob to select "Alarm 1" or "Alarm 2", and then press the OK/SNOOZE
button to confirm.
3. Turn the SCROLL + / - knob to select options (Time, Sound, Repeat, Alarm volume), and then press
the OK/SNOOZE button to confirm the settings.
4. When an alarm rings, press SNOOZE button to stop the alarm. The alarm will sound again 9
minutes later.
5. When an alarm is stopped, press ALARM button, the alarm will sound again the next day at the
same time.
Backlight Setting
This radio display has a backlight with adjustable brightness level.
1. Press the Menu button and select Configuration - Dimmer, then press the OK/SNOOZE button to
confirm.
2. Turn the SCROLL + / - knob to select Mode or Level, and then press the OK/SNOOZE button to
confirm.
3. Turn the SCROLL + / - knob to select backlight level, and then press the OK/SNOOZE button to
confirm the setting.
Language setting
You can change the display language of your unit, there are 9 options available: German, English,
Spanish, French, Italian, Dutch, Polish, Russian and Chinese.
1. Press the Menu button and select Configuration - Language, press the OK/SNOOZE button to
confirm.
2. Turn the SCROLL + / - knob to select your desired language, and then press the OK/SNOOZE
button to confirm.
Factory reset
Doing a factory reset clears all user defined settings, replacing them with the original default values, so
time/date, DAB station list and preset stations are all lost.
1. Press Menu button and select Configuration - Reset to default, press OK/SNOOZE button to
confirm.
2. Turn SCROLL + / - knob to select "YES" and then press OK/SNOOZE button to confirm.
Technical specification
Item number:
Power adaptor:
Audio output:
Frequency range:
FM:
DAB:
MIR-260
100-240V ~ 50/60Hz
2 x 10W RMS
87.5 MHz to 108 MHz
Band III, 174.9 MHz to 239.2 MHz
8
9