Safety Information; Safety Precautions - Awenta AHR Serie Anleitung

RECUPERATOR OPERATING MANUAL
AHR
IMPORTANT INFORMATION
Please read the Operating Manual carefully before assembling it or any other activity related to work with the appliance! AWENTA shall not be liable for any
damage resulting from incorrect operation, non-intended use or unauthorized repair or modi cations of the product.
The Operating Manual and the installation instructions contained in it are an essential part of the product equipment. The Operating Manual speci es
important technical information and instructions for the operating safety. Carefully read the assembly manual and keep it available in a readily accessible
place for future reference. A copy of the operating manual can be downloaded from www.awenta.pl

Safety information

The following safety symbols show important safety information. Follow all safety regulations and the safety symbols shown in the Operating Manual to
avoid injury and hazards.
Electric shock hazard

Safety precautions:

• This equipment may be used by children of at least 8 years of age and by
persons with reduced physical or mental abilities and persons with no
experience or knowledge of the equipment if supervised or instructed
on its safe use so that the risks associated with it are understandable. This
product is not a toy and children should not play with it. Children should
not be allowed to clean or maintain the product without supervision of
an adult.
• The appliance is intended for permanent installation and connection
with the building electrical system. The building electrical system
connected to the air exhaust fan must be capable of breaking live
voltage contact on all switching poles to fully isolate the air exhaust fan
from power during Category III overvoltage conditions, in accordance to
applicable electrical engineering regulations.
• The appliance is only intended for installation in a position and an
orientation speci ed in the Operating Manual, given the necessary
entry of the power supply cable into the air exhaust fan housing.
• Before servicing the appliance, isolate it completely from the mains
voltage with the circuit breaker. Secure the circuit breaker against
inadvertent operation.
• The air exhaust fan installation design must prevent reverse ow of ue gas into the room from open ue gas exhaust ducts and appliances operated with
open ames.
• Never attempt to modify or alter the air exhaust fan without authorisation.
• Before installing the appliance, check the load capacity of structural components, to which it will be attached, as improper attachment can result in damage
to or destruction of the appliance, as well as cause hazard to the persons nearby.
The appliance can be hazardous when operated against its intended use or installed by unquali ed personnel.
Application and operating conditions
• The recuperator is intended for pumping air of normal quality or with a low dust content (with a particle size < 10 m) and without aggressive chemicals or
high humidity. The air exhaust fan is intended for operation in temperate climate conditions.
• The appliance may be operated only in a permanent indoor installation and with its power supply cable concealed.
• The permissible operating temperature range of the AHR160 unit is -20°C to +40°C.
• The permissible operating temperature range of the AHRTH sensor is +5°C to +40°C.
Danger!
– high voltage!
Caution:
rotating components!
EN
9