Safety Measures - Vitek VT-1286 B Die Betriebsanweisung

STEAM STATION (GARMENT STEAMER)
VT-1286 B
The garment steamer is intended for careful
smoothing of folds on clothes or furniture.
Description
Steam release openings
1.
Steam delivery button
2.
Water tank release buttons
3.
Water tank
4.
Nozzle brush
5.
Crease attachment
6.
Pilot lamp
7.
On button
8.
Water inlet plug flag
9.
Water inlet
10.
ATTENTION!
For extra safety, we recommend installing a resid-
ual current device (RCD) with nominal threshold
current 30 mA or under. To have a RCD installed,
contact service personnel.

SAFETY MEASURES

Before using the unit, read this manual carefully
and keep it for future reference.
Use the unit for intended purposes only, as speci-
fied in this manual.
Mishandling the unit may cause its failure and
inflict damage on the user or his/her property.
• Before using the unit for the first time, make
sure that the voltage in your mains corre-
sponds to unit operating voltage.
•
The power cord is equipped with a Euro-
plug; insert it into a socket that has a reliable
grounding connection.
•
To avoid fire, do not use adapters for connect-
ing the unit to the mains
•
Do not use the unit outdoors or in bathrooms.
• Place the unit vertically on an even, dry, mois-
ture-resistant surface, do not place it horizon-
tally and do not turn it over.
• Do not use the garment steamer near heat
sources or open fire.
• Before using the unit, examine the power cord
closely and make sure that it is not damaged.
If you find any damages of the power cord, do
not use the garment steamer.
•
Make sure that the power cord does not con-
tact with hot surfaces and sharp furniture
edges. Avoid damaging the isolation of the
power cord.
•
Use only the attachments supplied.
VT-1286.indd 3
•
Before using the unit, make sure that the
attachment has been set properly.
•
Do not switch the unit on if the water tank is
empty. Switch the unit off once the water tank
runs out of water.
•
During operation, hold the garment steamer
vertically and do not turn it over.
•
Use only clean water to fill the tank. We rec-
ommend using water additionally purified with
a domestic filter. Do not use sparkling water or
any scent additives.
• Keep the water level in the garment steamer
over the minimal mark «MIN» and under the
maximal mark «MAX» at all times. If the water
level exceeds the maximal mark, hot water
may splash out of the garment steamer.
Always unplug the garment steamer from the
mains before cleaning, installing/removing
the attachments, filling the water tank or emp-
tying it. Unplug the unit if you do not use it.
• Do not cover the steam release openings and
do not insert any objects in them.
•
To avoid burns, hold the garment steamer
with your hand near the steam delivery button,
since the upper part of the garment steamer
body becomes very hot during operation.
•
During garment steamer operation, avoid get-
ting burnt by hot steam that goes out from the
steam release openings.
•
Use the unit only as intended. Never steam
clothes on a person, since the steam is very
hot. Always use a hanger.
• Never direct the steamer onto people, ani-
mals and plants as well as onto furniture, elec-
tric appliances, books and any other objects
that can be damaged by hot steam. Garment
steamer should be at least 20 cm away from
any such objects.
•
Do not immerse the unit, the power plug or the
power cord into water or other liquids.
•
Do not touch the unit body and the power plug
with wet hands.
• Never leave the unit connected to the mains
unattended.
• Clean the garment steamer regularly.
•
Do not let children play with the unit and do
not allow them to touch the unit body and the
power cord during the steamer operation.
•
This unit is not intended for usage by children
under 8.
•
Children whose age is 8 or over, as well as dis-
abled persons, may use this unit only when
supervised by a person who ensures their
3
ENGLISH
05.02.2016 15:38:11