Installing Or Replacing The Alkaline Batteries; Before Use - Panasonic ER-GN300 Betriebsanleitung

Installing or replacing the alkaline batteries

• Make sure that the power is off.
1. Pull the battery cover straight to
2.  C heck the polarity of the alkaline
3. Insert the battery cover straight.
You can use the appliance for
approximately 6 months with two
Panasonic LR03 (AAA Alkaline
Batteries). (When using dry in an
environment at a 20 °C room
temperature, once a week, and
90 seconds at a time.)
Notes
• When insert the alkaline batteries, wipe off the main body
• Confirm nothing adheres to the terminals (
• Be sure to use LR03 (AAA Alkaline Batteries). If any batteries
• Panasonic alkaline batteries are recommended.
• When replacing alkaline batteries, replace both of them with new

Before use

Be sure to close the water inlet of the wash
switch ring during use. Otherwise, the main
body cannot provide sufficient suction
power.
→ C heck that the marks of " " , "
PB016214 - ER-GN300
remove it.
batteries ( and
them.
carefully to prevent water droplets from getting inside.
alkaline batteries.
other than the specified ones are used, the power and the
number of times of use will be different.
ones.
" " align (as shown in right figure).
_(01GB)_06-20-18.indd 9
) and install
" and
2
3
1
and ) of the
9
2018/6/20 10:53:50