Technical Specifications; Electrical Wiring - Buffalo FS440 Bedienungsanleitung

Technical Specifications

Model Voltage
FS440 220-240V~
50Hz
FS441
FS442

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
BUFFALO parts have undergone strict product testing in order to comply
with regulatory standards and specifications set by international,
independent, and federal authorities.
BUFFALO products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO.
Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to
FS440-FS441-FS442_ML_A5_v1_20211118.indb 7 FS440-FS441-FS442_ML_A5_v1_20211118.indb 7
Blending
Power Current
Capacity
500W 2.2A 60L
500W 2.2A 100L
500W 2.2A 120L
change specifications without notice.
Shaft Dimensions
length h x Ø mm
300mm 708 x 100
400mm 808 x 100
500mm 908 x 100
UK
Weight
3.60kg
4.00kg
4.20kg
7
2021/11/18 16:32 2021/11/18 16:32