Troubleshooting & Faq; Need Help - Philips Active Crystals SWB9200 Bedienungsanleitung

trouBleshootinG & FaQ
there is intermittent sound disruption or static is heard
1 Check the battery status and recharge the headset if the battery
is running low
2 Check that the distance between your mobile phone and the
headset is within the specified operating range
3 Check if there are any barriers between the headset and your
mobile phone
4 For the best audio quality, always wear your headset on the same
side as your mobile phone
there is no sound when you turn on the headset
1 ensure that the headset has been paired with the relevant mobile
phone and is switched on
2 increase the volume on the headset
the headset cannot be paired
1 Please revisit the section "Pair your Breeze headset with your mobile
phone" and follow the steps accordingly.
2 ensure that you have entered the right Pin (0000).
3 delete all Bluetooth devices recorded in your mobile phone
and attempt to pair it with your Breeze headset again.
4 ensure that your headset is not connected to any other
Bluetooth device

Need help?

Online help: www.active-crystals.com
For interactive help, frequently asked questions, software updates
and support.
All manuals and user guides at all-guides.com
troubleshooting & FaQ 13 en