Troubleshooting; Technical Specifications - cecotec PUREAROMA 550 CONNECTED SAND Bedienungsanleitung

5. TROUBLESHOOTING

Problem
The unit does not turn on
or off.
The product emits
unusual or no steam.
Water leaks.

6. TECHNICAL SPECIFICATIONS

Product reference: 05642/05643/05644/05645/05646/05647/05648/05649
Product:
Pure aroma 550 Connected Sand
PureAroma 550 Connected SunLight
PureAroma 550 Connected Sky
PureAroma 550 Connected Garnet
PureAroma 550 Connected Stone
PureAroma 550 Connected White Woody
550 Connected Grey Woody
PureAroma 550 Connected Black Woody
220-240 V~ AC, 50/60 Hz
20 V~ DC, 1000 mA
Water tank: 500 ml
Working frequency: 2.4 GHz
Cause
There is not enough water in
the tank.
The power cord is not
properly plugged.
Not enough or too much
water in the tank.
The water tank is dirty.
The air inlet or the product's
base is dirty.
The upper lid and the inner
cover are not fixed properly.
Temperature is too low or
there is too much humidity
and steam condenses,
forming water droplets.
ENGLISH
Solution
Add water to tank.
Disconnect the power cord,
check the cord and connect
it again.
Add the correct amount of
water (do not exceed the max.
mark).
Follow the "Cleaning and
maintenance" steps.
Clean both the air inlet and
the product's base in order to
remove blockages.
Remove the upper lid and the
inner cover so steam can be
released and installed them
back in their correct position.
Do not operate the product
under humid or extremely
cold conditions.
PUREAROMA 550 CONNECTED 29