AGPtek M6 Bedienungsanleitung Seite 6

For First Use
Before you start using AGPTEK-M6/M16, please check the following information.
Computer System Requirements
When you connect AGPTEK-M6/M16 to your computer, check the system requirements of your
computer ,The system must support the standard USB2.0 port.(Windows® 98/2000/ME/XP/Vista
/10/Mac OS/Linux）.For other systems, M6/M16 may not be recognized properly. Some systems
may need to install drivers manually.
How to reset or format the device:
Find Settings > Factory settings/Format device, choose Yes or No to make or cancel the changes.
Note: Format the device will delete all of the data in this player. Before formatting the device,
please backup the files so as not to lose any files.
How to Charge the player：
Charging port/Data transmission port
1. Connect the player to an adapter(5V/500mA ) with a USB cable. Usually, it will need about 2
hours to charge the player.
2. Charge by computer: Connect the device to a running computer via the USB cable included.
USB 2.0 port only. Usually, it will need about 2 hours to charge the player.
Note: If the charging condition doesn't meet the standard, it may cause device malfunction, which
would be regarded as man-made damage.
All manuals and user guides at all-guides.com
4