Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Relay switch with integrated Wi-Fi, 16 A,
1 channel
Item no. 2349922
Intended use
The product is intended to wirelessly switch on and off a power consumer (e.g. a lamp) via
Wi-Fi.
In addition, loads can be controlled by connecting a conventional button or toggle switch to
the product.
The product is intended for permanent installation in a flush or wall mounted contact box.
Operation or programming is carried out via the "Smart Life – Smart Living" app. A free
account is necessary to use this app. It must be created during initial setup of the app.
The product may only be connected to the mains voltage (see the "Specifications" section).
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture, for
example in bathrooms, must be avoided.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such , as a short circuit, fire or electric shock. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
Android
is a registered trademark of Google LLC.
TM
Delivery content
• Wi-Fi relay switch
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Description of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
The product should only be used in dry, indoor locations. It must not get damp or
wet.
Read the operating instructions carefully.
Safety information
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
Caution, safety hazard!
The product should only be installed by people with relevant electrical
knowledge and experience! *)
If it is not installed properly, you risk:
• your own life
• and the life of user of the electrical device.
• if it is not installed properly, you risk severe damage to property, e.g., by fire.
You face the risk of personal liability for personal injury and material damage.
Always consult an electrician!
*) Technical knowledge required to perform the installation:
For the installation, the following specialist knowledge is required in particular:
• The "Five safety rules": Disconnect from the mains; protect against accidental
switch-on; ensure there is no voltage; earth and short-circuit; cover or protect
neighbouring live parts.
• Use suitable tools, measuring devices and personal protective equipment, where
necessary.
• Analyse measurement results.
• Use electrical installation materials to ensure the turn-off criteria.
• IP protection ratings
• Install electrical installation materials
• Type of power supply (TN system, IT system, TT system) and the corresponding
connection criteria (classic earthing, protective earthing, necessary additional
measures etc.)
If you are not a professional, do not do it yourself, have it performed by a
specialist.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets. There is a
danger of life-threatening electric shock!
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
• If it can be assumed that safe operation is no longer possible, the device
must be turned off and precautions must be taken to ensure that it is not used
unintentionally. Do not touch the relay switch or any device connected to it.
Disconnect the product from the mains voltage by switching off the respective
circuit breaker or by unscrewing the fuse. Furthermore, turn off the earth leakage
circuit breaker to disconnect all the poles of the mains supply.
After this, arrange for an expert to check the product.
• Always comply with the accident prevention regulations for electrical equipment
when using the product in industrial facilities!
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) How to connect
• Product installation must be carried out in a deenergised state. Turn off the mains
supply by switching off the respective circuit breaker or by unscrewing the fuse.
Protect it against an unauthorised switch-on, e.g. with a danger sign.
Furthermore, turn off the earth leakage circuit breaker to disconnect all the poles
from the mains voltage.
• Check the mains connection for absence of voltage using a suitable tester.
• The product must only be used when it is mounted in a fixed location. Install the
product, for example, in a suitable flush or wall mounted contact box.
• Ensure that the insulation of the casing is neither damaged nor destroyed.
• Never touch the product with wet or damp hands! There is a risk of fatal electric
shock!
• Never overload the product. Observe the information on the maximum load in the
"Specifications" section.
Werbung
Inhaltsverzeichnis
