Herunterladen Inhalt Inhalt Diese Seite drucken

HEYLO AC 25 Bedienungsanleitung Seite 21

Vorschau ausblenden Andere Handbücher für AC 25:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cooling mode
Press the "MODE" button until the "COOL" display lights up.
Use the "TEMP+" and "TEMP-" buttons to set the desired room temperature.
Press the "Fan Speed" button to set the fan speed.
Heating mode
Press the "MODE" button until the "HEAT" display lights up.
Use the "TEMP+" and "TEMP-" buttons to set the desired room temperature.
Press the "Fan Speed" button to set the fan speed.
Drying mode
Press the "MODE" button until the "DEHUMIDIFY" indicator lights up.
Set the desired room temperature to 2°C below the current room temperature.
Set the fan speed to "LOW".
Ventilation mode
Press the "MODE" button until the "FAN" display lights up.
Press the "Fan Speed" button to set the fan speed.
Timer setting
In the timer setting you can choose whether the unit starts up or goes off after a desired number of hours.
The unit switches on automatically after a certain time interval:
The air conditioner must be switched off for this. Now press the "TIMER" button and select the number
of hours (0-24h) after which the unit should start automatically using the "TEMP+" and "TEMP-"
buttons.
Press the "TIMER" button again to confirm
The "TIMER" indicator now lights up.
The unit switches off automatically after a certain time interval:
The air conditioner must be switched on for this. Now press the "TIMER" button and select the number
of hours (0-24h) after which the unit should switch off automatically using the "TEMP+" and "TEMP-"
buttons.
Press the "TIMER" button again to confirm
The "TIMER" indicator now lights up.
Water tank full indicator
The air conditioner has a condensate collection tank in which a safety switch is located which activates the "FULL"
display when the maximum fill level is reached.
In the cooling and drying modes, the condensate is automatically evaporated. If this function is defective, the
condensate container must be emptied manually. To do this, connect the condensate hose to the air conditioner.
All manuals and user guides at all-guides.com
21
EN

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis