Pre-Pumping The Engine - Fuxtec FX-WP143 Original Bedienungsanleitung

Original Bedienungsanleitung FUXTEC FX-WP Serie_de_en_fr_ita_rev09
Gasoline is highly flammable and can cause an explosion in case of sparks
⚫
Refuel only in well-ventilated rooms and let the engine cool down before filling.
⚫
Smoking and open fire, as well as any sparks, must be avoided during refueling
Do not overfill the tank (see figure max. filling level)
⚫
After refueling, check that the fuel filler cap is properly closed
⚫
Avoid any spillage of gasoline
⚫
Keep the device away from children
⚫
Gasoline with an ethanol content
The engine can be operated with E10 gasoline. However, do not use gasoline with
a higher ethanol content than 10%.
22.

Pre-pumping the Engine

Before starting the engine, remove the filler cap from the pump chamber and
fill it with water. Reset the filling cap and pull
tight.
NOTE
Dry operation of the pump will cause damage to the pump seals. If the pump runs dry,
switch off the motor immediately and let the pump cool down before pre-pumping.
All manuals and user guides at all-guides.com
31