Electric Shock - AFRISO PrimoTherm 180-1 Betriebsanleitung

5.6 Electrical connection

ELECTRIC SHOCK

• Verify that the degree of protection against electric shock (protection class,
double insulation) is not reduced by the type of electrical installation.
Failure to follow these instructions will result in death or serious injury.
ELECTRIC SHOCK CAUSED BY LIVE PARTS
• Disconnect the mains voltage supply before performing the work and ensure
that it cannot be switched on.
• Verify that no hazards can be caused by electrically conductive objects or
media.
Failure to follow these instructions will result in death or serious injury.
DAMAGE TO THE PUMP ELECTRONICS
• Verify that the pump is not controlled via an external speed controller which
changes the supply voltage.
• Verify that the pump is controlled with 230 V without phase angle control.
• Switch the pump on and off via the controller.
Failure to follow these instructions can result in equipment damage.
1. Connect the circulation pump and the actuator in accordance with the
instructions of the manufacturer.
All manuals and user guides at all-guides.com
Mounting
180-1 DN 32 / 180-2 DN 32 / 180-3 DN 32 RTA
DANGER
DANGER
NOTICE
EN
23